HOW TO ORDER
On each of the main product pages in this website you will find a cable gland selection table which includes the part number, typically of a standard metric product, for ordering purposes. The part number is composed of the CMP Size, Type Number, and Standard Suffix.
The table below is provided to allow the selection of alternative materials, thread types, thread sizes and other options.
| Cable Gland Size & Type | Options | Supply Type | CMP Sth Suffix | Material | Entry Thread Type | Entry Thread Size | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Imperial | PG | NPT / BSP / NPSM | Metric | ||||||||||
| e.g. 20E1FW | D | Deluge Seal | 1 - Gland | RA | 0 | Brass | 1A | Metric | 1A | 1/2“ | 7 | 3/8” | - |
| - | B | Brazilian Certification |
2 - Pack | - | 1 | Aluminium | 1 | Imperial | 1 | 5/8” | 9 | 1/2“ | 16 |
| - | - | - | 2 | Nylon | 2 | PG | 2 | 3/4“ | 11 | 3/4“ | 20 | ||
| 4 | Stainless Steel | 3 | NPT | 3 | 1" | 13.5 | 1" | 25 | |||||
| - | - | - | 5 | Brass - Fully Nickel Plated |
4 | BSP | 4 | 1-1/4” | 16 | 1-1/4” | 32 | ||
| - | - | - | 6 | N/A | 5 | NPSM | 5 | 1-1/2” | 21 | 1-1/2” | 40 | ||
| - | - | - | 7 | Brass with Nickel Plated Entry Component |
6 | BSPT | 5A | 1-7/8" | - | - | - | ||
| - | - | - | 8 | Zinc Plated | - | - | 6 | 2” | 29 | 2” | 50 | ||
| - | - | - | - | - | - | 7 | 2-1/2” | 36 | 2-1/2” | 63 | |||
| - | - | - | - | - | - | 8 | 3” | 42 | 3” | 75 | |||
| - | - | - | - | - | - | 9 | 3-1/2” | 48 | 3-1/2” | 90 | |||
| - | - | - | - | - | - | 10 | 4” | - | 4” | 100 | |||
| 11 | 4-1/2" | - | 4-1/2" | 115 | |||||||||
| - | - | - | - | - | - | 12 | 5" | - | 5" | 130 | |||
Unless otherwise stated, for IEC products, the standard Hazardous Area certification marking includes ATEX and IEC Ex as a minimum – please refer to CMP Products if your requirement differs from the standard
